FP 360sc Sonda za olje v vodi, 0,1–15 ppm olja, ss, 10 m, s čiščenjem

FP 360sc Sonda za olje v vodi, 0,1–15 ppm olja, ss, 10 m, s čiščenjem
Številka izdelka: LXV441.99.11201
Cena na enoto Kontakt
Odprema v 2 tednih

Najnižji stroški lastništva

Due to its unique combination of submersible probe design and UV fluorescence sensing technology, the FP360 sc delivers the best technology to detect oil in water and is priced below competitive UV fluorescent instruments.

Potopna sonda: meri neposredno v mediju

The FP360 sc has no tubes, pumps, or valves that can foul or require constant maintenance interventions. Maintenance is limited to occasional wiping of the sensor's measurement window and a calibration once every two years.

Mineralno olje v vodi – meritve
do najmanjših sledov

While laboratory testing is the ultimate method of measuring oil in water, it is a long and complex process that requires special equipment and trained lab personnel. The FP360 sc provides a cost-effective, continuous online monitoring solution to maintain process control and avoid oil contamination with minimal laboratory testing.

Trpežne sonde, na voljo tudi v titanu

The FP360 sc can detect and measure polycyclic aromatic hydrocarbons (PAHs) from 1.2 ppb to up to 5000 ppb (µg/L). This is approximately equivalent to a concentration of mineral oil between 0.1 to 150 ppm (mg/L). Furthermore, the FP 360 sc method of detection makes it impervious to interferences by turbid water or natural organic and biological matter that impact online light scattering, UV absorbance, and VIS fluorescence instruments.

Digitalna kontrolna enota SC za do
8 sond

The Hach Digital Controller Family can receive data from up to eight Hach digital sensors, including oil-in-water, suspended solids, turbidity, pH/ORP, dissolved oxygen, conductivity, ammonium, phosphate, SAC, and nitrate in any combination.

There’s no complicated wiring or set up procedures with the family of controllers. Just plug the sensor to any Hach digital controller and it’s ready to use because it’s “plug and play.”

Vsebina paketa

Oil-in-water probe, user manual

Specifikacije

Body Material: Stainless Steel
Čiščenje senzorja: Yes
Detektor: UV-fotodioda z interferenčnim filtrom; izravnava dnevne svetlobe in nihanj intenzivnosti bliskavice
Diameter: 68 mm
Dolžina: 311 mm
Dolžina kabla: najv. 40 m (130 ft), vključno s podaljškom
Garancija: 24 mesecev
Material: Ohišje: nerjavno jeklo 316Ti (1.4571)
Material ohišja: Stainless Steel
Merilna metoda: UV fluorescence method for polycyclic aromatic hydrocarbons (PAH)
Merilno območje: 0,1 - 15 ppm (mg/L) (olje) na podlagi standardov za umerjanje
  0 - 500 ppb (µg/L) (PAH) or 0.1 - 15 ppm (mg/L) (Oil)
  0 - 500 ppb (µg/L) PAK, na podlagi standardov za umerjanje
Območje tlaka: Najv. 30 bar /435 psia (merilna sonda)
Obnovljivost: 2,5 % izmerjene vrednosti pri stalni temperaturi
Odzivni čas T90: 10 s
pH vrednost(i): ≥ 4
Pobuda: Valovna dolžina 254 nm
Pogoji skladiščenja: -40 °C - 60 °C
Svetlobni vir: Miniaturna ksenonska bliskavica z interferenčnim filtrom
Temperatura okolja: -5 - 45 °C
Temperatura vzorca: 1 - 40°C (33,8–104°F)
Teža: 2.8 kg
Umeritev: Tovarniško umerjeno z UV-fluorescenčnim standardom ali procesno umerjanje z rezultati analize zajemnega vzorca.
Vsebina paketa: Oil-in-water probe, user manual