Certificiranje:
CE/ETL, EMC
Delovna temperatura:
0 - 50 °C (assured temperature compensation up to 45 °C)
Diameter:
25 mm
Dimenzija:
mm x 25 mm (7.68 in x 0.98 in)
Sensor Only: 195
Dimenzija (v x š x g):
483 mm x 495 mm x 151 mm
Dolžina:
Sensor: 195 mm
Dolžina kabla:
1 m (between gateway and SC controller)
Garancija:
24 mesecev
Interference :
Free chlorine: monochloramine, chlorine dioxide, ozone, and chalk deposits.
Total chlorine: chlorine dioxide, ozone and chalk deposits
Kontrolna enota:
Panel only
Material:
Panel: Corrosion-resistant, fully-submersible (stainless steel, PVC, silicon rubber and polycarbonate)
Meja zaznavanja:
30 ppb (0.03 ppm)
Merilna metoda:
Reagentless, electrochemical, three-electrode amperometric system
Merilno območje:
0 - 20 ppm Cl₂
Način montaže:
Flat, vertical surface
Napetost (V):
12 V DC ±10%, 100 mA maximum (supplied by SC controller)
Natančnost:
Free Chlorine: ±10 % of the reference test (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
Free Chlorine: ±3 % of the reference test (DPD) at constant pH less than 7.2 (±0.2 pH unit)
Total Chlorine: ±10 % of the reference test (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
Total Chlorine: ±20 % of the reference test (DPD) at stable pH greater than 8.5
Območje tlaka:
0.5 bar, no pressure impulses and/or vibrations
Obseg dobave:
Free chlorine sensor, chlorine sensor block, SC gateway, stainless steel panel and pH flow cell for grab samples
Odzivni čas :
Total Chlorine: 100 s or less for 90% change (T90) at a stable temperature and pH
Свободен хлор: 140 s секунди или по-малко при 90 % промяна (T90) при стабилна температура и pH
Parameter:
Free Chlorine
pH območje:
4 - 9
Pogoji skladiščenja:
-20 °C - 60 °C dry
Ponovljivost:
30 ppb ali 3%, kar je večje
Povezava s kablom:
5 pin, M12 connector
Pretok vzorca:
30 - 50 L/h, optimal is 40 L/hour
Priključek linije vzorca:
1/4 in OD
Priključek odvoda:
1/2 in ID
Stopnja pretoka:
Metric
Temperatura vzorca:
5 - 45 °C
Temperaturna kompenzacija:
Internal temperature compensation in the sensor
Internal temperature compensation in the sensor
Teža:
Approximately 5.5 kg (12 lbs)
Panel and empty panel-mounted components only
Umertivena metoda:
1-point or 2-point (zero and slope) calibration
Vsebina paketa:
Free chlorine sensor, chlorine sensor block, SC Gateway, stainless steel panel and pH flow cell for grab samples
Width:
495.3 mm
Združljivost kontrolnih enot:
SC200, SC1000, SC4500. All controllers sold separately